Position: HOME  /  PRODUCTS

Electric Vehicle and Charging Equipment Protection

Automotive EV Fuses / EV&EVSE Charging Equipment Fuses / EV Fuse Holders and Accessories

Automotive EV Fuses

AE2 10x38 mm 500 Vdc EV Fuse

Adler AE2 series EV fuses are specially engineered and tested to provide best-in-class auxiliary protection and high performance protection in managing systems of Electrical and Hybrid Electrical Vehicles, up to 500 Vdc in ratings from 10 - 50A. The AE2 was specifically built from the ground up to meet the stringent requirements and standards of the electric vehicle industry. 

ADP 80X80 3500V Gas Discharge Tube

Adler ADP gas discharge tube can be used for electric vehicle on-board chargers, power and video systems, voice separators, base stations and antennas first-class protection performance, DC breakdown voltage of 100V/s, pulse breakdown voltage of 1kV/μS.

AE3 10X38 mm 850 Vdc EV Fuse

Adler AE3 series EV fuses are specially engineered and tested to provide best-in-class auxiliary protection and high performance protection in managing systems of Electrical and Hybrid Electrical Vehicles, up to 850 Vdc with current ratings from 5 - 50A. The AE3 was specifically built from the ground up to meet the stringent requirements and standards of the electric vehicle industry.

AE4 10x26 mm 200 Vdc EV Fuse

Adler AE4 series EV fuses are specially engineered and tested to provide best-in-class auxiliary protection and high performance protection in managing systems of Electrical and Hybrid Electrical Vehicles, up to 200 Vdc / 275 Vac in ratings from 10 - 50A. The AE4 was specifically built from the ground up to meet the stringent requirements and standards of the electric vehicle industry.

AE5 500 Vdc EV Fuse

Adler AE5 series EV fuses are specially engineered and tested to provide best-in-class PUD (power distribution unit) protection and battery high performance protection in managing systems of Electrical and Hybrid Electrical Vehicles, up to 500 Vdc in ratings from 50-700 A. The AE5 was specifically built from the ground up to meet the stringent requirements and standards of the electric vehicle industry. EV Motor and Control Unit Battery Pack

AE6 1000 Vdc EV Fuse

Adler AE6 EV fuses series are specially engineered and tested to provide best-in-class auxiliary and high performance protection in managing systems of Electrical and Hybrid Electrical Vehicles. With up to 1000 Vdc in ratings from 5 - 60A. The AE6 was specifically built meet the stringent requirements and standards of the electric vehicle industry.

AE6-V 1000 Vdc EV Fuse

Adler AE6-V series EV fuses are specially engineered and tested to provide best-in-class auxiliary protection and high performance protection in managing systems of Electrical and Hybrid Electrical Vehicles. With up to 1000 Vdc in ratings from 10 - 60A the AE6-V series was specifically built from the ground up to meet the stringent requirements and standards of the electric vehicle industry.

AE7 800 Vdc EV Fuse

Adler AE7 series EV fuses are specially engineered and tested to provide best-in-class auxiliary protection and high performance protection in managing systems of Electrical and Hybrid Electrical Vehicles, up to 800 Vdc in ratings from 60 – 600 A. The AE7 fuse was specifically built to meet the stringent requirements and standards of the electric vehicle industry. 

AEX 1000 Vdc EV Fuse

Adler AEX series EV fuses are specially engineered and tested to provide best-in-class auxiliary protection and high performance protection in managing systems of Electrical and Hybrid Electrical Vehicles, up to 1000 Vdc in ratings from 70 – 600 A and a ated breaking capacity of 50 kA at 1000 Vdc. The AEX was specifically built from the ground up to meet the stringent requirements and standards of the electric vehicle industry. Useful in EV Motor and Control Unit Battery Packs

AEL 80 Vdc High Speed Fuse

Adler AEL series EV fuses are specially engineered and tested to provide best-in-class auxiliary protection and high performance protection in managing systems of Electrical and Hybrid Electrical Vehicles, up to 80 Vdc in ratings from 30 - 800A. The AEL was specifically built from the ground up to meet the stringent requirements and standards of the electric vehicle industry.


ABP 54X32 62V SMT BATTERY PROTECTOR_copy

Adler ABP Series is a surface mountable battery protector designed to protect against both overcurrent and  overcharging. Fuse can cut off the circuit when overcurrent occurs. Also, combining with IC and FET, the embedded heater can generate heat to blow the fuse element to achieve overvoltage protection.

AEY 70 Vdc EV Fuse

Adler AEY EV series fuses are specially engineered and tested to provide best-in-class bolt down auxiliary fuse protection and high performance protection in managing systems of Electrical and Hybrid Electrical Vehicles, up to 70 Vdc in ratings from 40 – 500A and an operating temperature from -40 to 125°C degrees. The AEY fuse is ideal for battery and alternator protection application and other heavy gauge cables requiring ultra-high current protection. Suitable for vehicles with high torque requirements in commercial EV industry.  

BF2 MINI Blade 32 Vdc Fuse

Adler's BF2 mini blade fuses are specially designed for EV applications. Capable of handling rated currents of 
3-30 A with a breaking capacity of 1kA at 32 Vdc. Made to UL standard 275A with reference to tollerances detailed in UL 275A and ISO 8820-3.

BF4 MINI Blade 32 Vdc Fuse

Adler's BF4 midi blade fuses are specially designed for EV applications. Capable of handling rated currents of 2-40 A with a breaking capacity of 1kA at 32 Vdc. Made to UL standard 275A with reference to tollerances detailed in UL 275A and ISO 8820-3.

EV And EVSE Charging Equipment Fuses

AT1 150 Vdc EVSE Fuse

Adler AT1 EVSE fuses series are specially engineered and tested to provide best-in-class bolt down auxiliary fuse protection and high-performance protection in managing systems of Electrical and Hybrid Electrical Vehicles, up to 150 Vdc in ratings from 20 – 200A with a max breaking capacity of 20kA at 150Vdc. The AT1 fuse is ideal for battery and alternator protection application and other heavy gauge cables requiring ultra-high current protection.


AT2 250 Vdc EVSE Fuse

Adler AT2 EVSE fuses series are specially engineered and tested to provide best-in-class bolt down auxiliary fuse protection and high-performance protection in managing systems of Electrical and Hybrid Electrical Vehicles, up to 250 Vdc in ratings from 200 – 500A with a max breaking capacity of 10kA at 250Vdc. The AT2 fuse is ideal for battery and alternator protection application and other heavy gauge cables requiring ultra-high current protection.


AT5 500 Vdc EVSE Fuse

Adler AT5 EVSE fuses series are specially engineered and tested to provide best-in-class bolt down auxiliary fuse protection and high-performance protection in managing systems of Electrical and Hybrid Electrical Vehicles, up to 500 Vdc in ratings from 60 – 400A with a max breaking capacity of 20kA at 500Vdc. The AT5 fuse is ideal for battery and alternator protection application and other heavy gauge cables requiring ultra-high current protection.


AT7 800 Vdc EVSE Fuse

Adler AT7 EVSE fuses series are specially engineered and tested to provide best-in-class bolt down auxiliary fuse protection and high-performance protection in managing systems of Electrical and Hybrid Electrical Vehicles, up to 800 Vdc in ratings from 125 – 400A with a max breaking capacity of 20kA at 800Vdc. The AT7 fuse is ideal for battery and alternator protection application and other heavy gauge cables requiring ultra-high current protection.


ATX 1000 Vdc EVSE Fuse

Adler ATX EVSE fuses series are specially engineered and tested to provide best-in-class bolt down auxiliary fuse protection and high-performance protection in managing systems of Electrical and Hybrid Electrical Vehicles, up to 1000 Vdc in ratings from 250 – 350A (single) and 400 – 600A (twin) with a max breaking capacity of 50kA at 1000Vdc. The ATX fuse is ideal for battery and alternator protection application and other heavy gauge cables requiring ultra-high current protection.


EV Fuse Holders and Accessories

BFR Series EV Fuse Holder

The BFR series EV fuse holder is suitable for use with automotive equipment and designed for ADLER EV fuse links.


BH114 Series Fuse Holder

The BH114 holder made of thermoplastic and is designed for 10x38 mm cylindrical fuses it allows for easy mounting on flat surfaces. This holder can be mounted on DIN Rail constructions.


Photovoltaic Fuses and System Protection

PV Cylindrical Fuses / PV NH Fuses / PV Surge Protection Devices / PV DC Isolators and Switches / PV Fuse Holders and Accessories

PV Cylindrical Fuses

A65 14x85 mm 1500 Vdc gPV Fuse

Adler A65 PV fuse links designed and manufactred to UL and IEC specifications. WIth rated currents from 10 - 50 A and a max breaking capacity of 50 kA at 1500 Vdc. Adler A65 fuses are made with ceramic bodies and silver plated caps for enhanced performance and longer life.

A73 10x38 mm 1000 Vdc gPV Fuse

The Alder A73 gPV (Photovoltaic) fuse series has a compact design and is used in in-line PV protection systems. This fuse series can safely protect PV string modules and combiner box systems from reverse overcurrent and overcurrent conditions. The A73 series has in-line fictionality and mutable terminal designs. Suitable for commercial and residential usage customizable for specific applications. 

A75 & A78 10x85 mm 1500 Vdc gPV Fuse

The Alder A75 gPV (Photovoltaic) fuse series has a compact design and is used in in-line (PV) protection systems. This fuse series can safely protect PV sting modules and combiner box systems from reverse overcurrent conditions. The A75 series has in-line and in-holder functionality. The 30A/32A designs include a rubber outer coating for additional protection. Suitable for commercial and PV farm customizable for specific applications. 


The Alder A78 gPV (Photovoltaic) fuse series has a compact design and is used in in-line (PV) protection systems. This fuse series can safely protect PV series string modules and combiner boxes from reverse overcurrent and overcurrent conditions. The design includes a rubber outer coating for protection. The A78 series gPV fuses is specially engineered and tested to provide best-in-class protection performance in protecting solar power systems, up to 1500 VDC in ratings from 2A to 15A.


A76 & A79 10x57 mm 1500 Vdc gPV Fuse

The Alder A76 gPV (Photovoltaic) fuse series has a compact design and is used in (PV) protection systems. This fuse series can safely protect PV modules inverters and conductors from reverse overcurrent conditions. The A76 gPV series has in-holder functionality. Suitable for commercial and home usage customizable for specific applications. 


The Alder A79 gPV (Photovoltaic) fuse series has a compact design and is used in in-line (PV) protection systems. This Mini fuse series can safely protect PV modules inverters and conductors from reverse overcurrent conditions. The A79 gPV series has in-line and in-holder functionality designs. Suitable for commercial customizable for specific applications. 


A83 10x38 mm 1000 /1100 Vdc gPV Fuse

The Alder A83 gPV (Photovoltaic) fuse series has been specifically designed for the protection of (PV) systems. These fuses can safely protect PV string modules, conductors and inverters from reverse-overcurrent and overcurrent conditions.

As PV systems have grown in size, so have the corresponding voltage requirements. This increase in system voltage has typically been intended to minimize power loss associated with long conductor runs. A83 gPV has up to 1100 Vdc breaking capacity.


A84 14x51mm1500 Vdc gPV Fuse

The Alder A84 gPV (Photovoltaic) fuse series has been specifically designes for the protection of (PV) systems. This series of fuses can safely protect PV series string modules and inverter from reverse overcurrent and overcurrent conditions. With both in-line and holder functionality and mutable terminal designs. Suitable for residential commercial and PV farm use.

A85 10x85 mm 1500 Vdc gPV Fuse

The Alder A85 gPV (Photovoltaic) fuse series has a long slender design and is useful in in-line (PV) protection systems. This series can safely protect PV series string modules, inverters and conductors from reverse overcurrent and overcurrent conditions. The A85 gPV series has both in-line and in-holder functionality and mutable terminal designs. The Alder A85 gPV series is both functional, reliable and affordable because of this it has become one of Alders best-selling products.  

A94 22x58 mm1500 Vdc gPV Fuse

The Alder A94 gPV (Photovoltaic) fuse series is used in (PV) protection systems. This series can safely protect PV modules inverters and conductors from reverse overcurrent conditions. This large strong and durable series has both in-line and holder functionality with mutable terminal options. With up to 80A 1500 Vdc this robust and durable is a best seller among Alder products. 

A95 24x65 mm 1500 Vdc gPV Fuse

The Alder A95 gPV (Photovoltaic) fuse series is designed for (PV) protection systems. This series can safely protect PV modules inverters and conductors from reverse overcurrent conditions. A95 series has both in-line and in-holder functionality and mutable terminal designs. With a high Amp rating A95 is a leader in its class. Suitable for commercial, PV farm application customizable for specific applications. 


PV NH Fuses

AX6 gPV 1500 Vdc Fuse

The AX6 gPV (Photovoltaic) series has been designed to meet the emerging circuit protection needs for photovoltaic systems. Durability is insured with a strong ceramic body and silver copper alloy end bells. Suitable for PV inverter protection main line protection applications.

The AX6 series is primally for commercial usage, using the highest quality martials and customizable for specific application.


AX7 gPV 1000 / 1500 Vdc Fuse

The AX7 gPV (Photovoltaic) series has been designed to meet the emerging circuit protection needs for 1000/1500V photovoltaic systems. Durability is insured with a strong ceramic body and silver copper alloy end bells. Suitable for PV main line, inverter and power storage systems protection.

The AX7 series is primally for commercial usage and PV farm customizable for specific application.

AX8 gPV 1000 / 1500 Vdc Fuse

The AX8 gPV (Photovoltaic) series has been designed to meet the circuit protection needs. Durability is insured with a strong ceramic body and silver copper alloy end bells and other high quality materials. These fuses provide full range protection for all potential overcurrent conditions in PV applications. 

Suitable for PV inverter protection and main line protection applications.


PV Surge Protection Devices

ASPD 1000 Vdc PV Surge Protection Device

ADLER’s ASPD Series PV DC Surge Protection Devices are designed and manufactured complying to PV standard IEC 61643-31. They are widely used in PV dc combiner boxes, inverters, controllers and dc cabinets. With a rated voltage of 1000 Vdc and a maximum discharge current of 40 kA, the integrated high-energy varistor provides highly effective protection against lightning and surge voltages.


ASPD 1500 Vdc PV Surge Protection Device

ADLER’s ASPD Series PV DC Surge Protection Devices are designed and manufactured complying to PV standard IEC 61643-31. They are widely used in PV dc combiner boxes, inverters, controllers and dc cabinets. With a rated voltage of 1500 Vdc and a maximum discharge current of 40 kA, the integrated high-energy varistor provides highly effective protection against lightning and surge voltages.

PV Fuse Holders and Accessories

BH100-01/BH100-02 1000/1100 Vdc Fuse Holder

ADLER BH100-01 touch safe fuse holders are designed
for all standard 10x38mm PV fuses such as ADLER A73 /
A83 series.

ADLER BH100-02 touch safe fuse holders are designed
for all standard 10x38mm PV fuses such as ADLER A73 /
A83 series. 
This holder has an indicator light which will light up when the circuit is interrupted.

BH200/BH201 1500VDC Fuse Holder

BH200 touch safe holders are designed for 14x51 mm cylindrical fuse links, especially for use with photovoltaic equipment.

The BH201 touch safe holder is designed for 14x51mm fuse links and is equipped with a red indicator light. It will light up when the circuit is interrupted.

BH300 1500 VDC Fuse Holder

ADLER’s BH300 touch safe fuse holder is designed for all standard 10x85 mm PV fuses such as ADLER A75 / A85 series and other cylindrical fuse up to Ø10x85 mm,
with current ratings up to 30 A at 1500 Vdc, it can effectively protect 1500 Vdv circuits and equipment in photovoltaic applications.

BH400 / BH401 1500 VDC Fuse Holder

ADLER’s BH400 and BH401 touch safe fuse holders are designed for all standard 22x58 mm PV fuses such as ADLER A94 series and other cylindrical fuses up to Ø22x58 mm, with current ratings up to 80 A at 1500 Vdc, it can effectively protect 1500 Vdc cuicuits and equipment in photovoltaic applications.
BH401 touch safe holder has an indicator light which will light up when the circuit is interrupted.

BHT100 / BHT200 / BHT300 1000Vdc /1500 Vdc Termina

The BHT100 terminal block is suited for PV installations using ADLER BH100-01, BH100-02 fuse holders.

The BHT200 terminal block is suited for PV installations using ADLER BH200, BH201 fuse holders.


The BHT300 terminal block is suited for PV installations using ADLER BH300 fuse holder.

BHB100 / BHB200 / BHB300 1000 Vdc/1500Vdc Busbar

The BHB100 busbar is suited for PV installations using ADLER BH100-01, BH100-02 fuse holders.

The BHB200 busbar is suited for PV installations using ADLER BH200, BH201 fuse holders.

The BHB300 busbar is suited for PV installations using ADLER BH300 fuse holder.

BC900 Fuse Accessories

The BC900 fuse clip is designed for Φ14mm cartridge fuse links, ideal for PCBA or bolt installation applications. Materials include brass and tin plate capable of managing 250V - 1500V.

BC800 Fuse Accessories

The BC800 fuse clip is designed for Φ10mm cartridge fuse links, ideal for PCBA or bolt installation applications. Materials include brass and tin plate capable of managing 250V - 1500V.

Power Utility Protection

Energy storage system (ESS) Fuses / Semiconductor Fuses / Industrial Power Fuses / Fuse Bases and Accessories

Energy storage system (ESS) Fuses

AHE aR 2# 1500 Vdc Fuse

Adler AHE aR 2# 1500 Vdc fuses are made in reference with IEC standards. With an amperage rating of 200 A - 800 A and a max breaking capacity of 250 kA. Adler AHE 1500 Vdc fuses have a strong current limiting capacity with a time constant of 3 - 5 ms. Microswitches are available for this fuse PN: MS0003.

AHE aR 3# 1500 Vdc Fuse

Adler AHE aR 3# 1500 Vdc fuses are made in reference with IEC standards. With an amperage rating of 315 A - 1200 A and a max breaking capacity of 250 kA. Adler AHE 1500 Vdc fuses have a strong current limiting capacity with a time constant of 3 - 5 ms. Microswitches are available for this fuse PN: MS0003.

Semiconductor Fuses

Semiconductor Fuses

ACT 14x22 mm 170 Vdc Fuses

Adler ACT series fuses are specially designed to meet the unique needs of telecom DC power distribution systems. This fuse is UL Recognized with 100 kA breaking capacity and excellent current-limiting capability make the ACT fuses ideal for over-current protection in DC distribution circuits of telecom equipment. Available in vertical, horizontal PCB tab and level bolt mounting configurations.

AG0 & AG2 240 Vdc / 150 Vdc Fuses

DESCRIPTION

Adler AG0 and AG2 series semi-conductor fuses are specially engineered and tested to provide best-in-class protection performance in industrial, utility, street lighting and domestic applications up to 240 Vac / 150 Vdc in ratings from 25A to 400A.

AG4 aR 690 Vdc Fuses

Adler AG4 aR 690 VAC high speed semiconductor fuses are manufactured and tested to the highest standards possible. With a rated current of 40 A - 100 A and a max breaking capacity of 50 kA at 690 Vac. These are a great choice for all your semiconductor needs.

ARC 10x38 mm 600 Vdc Fuses

Adlers fast acting ARC 10x38 fuses are used for the protection of cables against short-circuits and for motor protection. With rated currents from 0.5 A to 63 A and a max breaking capacity of 100 kA at 600 Vac.

Industrial Power Fuses

Industrial Power Fuses

APB 10x38 mm 700 Vac/dc Fuse

Adler's APB 10x38mm 700Vac/dc cartridge fuses are designed and tested to the highest standards possible for high speed semiconductor protection. With a rated current of 20 - 30 A and a max breaking capacity of 10 kA.

APD 10x38 mm 700 Vac/dc Fuse

Adler's APD 10x38mm 700 Vac/dc cartridge fuses are designed and tested to the highest standards possible for high speed semiconductor protection. With a rated current of 0.44 - 15 A and a max breaking capacity of 30 kA, making this a great special purpose fuse for DMI applications.

APT 10x38 mm Fuse

Adler's APT 10x38mm 125Vdc, 250 / 500 Vac cartridge fuses are designed and tested to the highest standards possible for high speed semiconductor protection. With a rated current of 31.5 - 80 A and a max breaking capacity of 1.5 kA at 125 Vdc and 500 Vac and 2.5 kA at 250 Vac, making this a great fuse choice for industrial and telecom power applications.

PU Fuse Bases and Accessories

PU Fuse Bases and Accessories

BH100-03 Series Fuse Holder

The BH100-03 series touch safe holder is designed for
10x38 mm cylindrical fuse links, especially for use with
industrial AC and DC applications.
This holder has a indicator light. It will light up when the
circuit is interrupted.
【TOP】 【PRINT】 【BACK】